Tag Archives: stomp box signal chain

Guitar Pedal Signal Chain Basics

So you buy your first guitar and amp and start learning to play. I can almost guarantee that it will not be long before you start to become interested in buying some pedals to stick between your guitar and amp and start a lifelong stomp box obsession……….

Pedal order is something that is talked about all the time and nothing is cast in stone and I always say to experiment and if it sounds right it is right!!!

That being said when you first get going you are going to want the basics so that is what I intend to do here. So in no particular order…………well actually in this order…………

  1. Tuner
  2. Wah Wah
  3. Overdrive
  4. Distortion
  5. Modulation (Chorus?Phaser)
  6. Reverb/Delay

The above order running into the front of the clean amp will give you the perfect starting point to experiment.

Hendrix for example was Wah-Fuzz-Uni vibe-Marshall Stack which follows the above starting point with the uni vibe being his modulation at the end of the chain.This is a classic signal chain and lets (fuzz) face it Hendix had a fantastic sound.

The other subject to touch on here in the basics is when you use the amp itself for your distorted tone. This is where you will find the reverb and delays respond differently going in the front end of your amp. Based on the above signal chain if your amp is providing the distortion then you are now running the reverb and delay before the distortion which is a completley different ball game. At this point it is time to find the effects loop on your amp and plug your reverb and delay through the loop to keep the signal path correct as shown below.

Effects Loop Send-reverb-delay-Effects Loop return

Effects loops are another lesson  to explain fully the different types and uses but for now lets just use the basic rule of reverb,delay,modulation(chorus/phaser) etc can all go through the front end or the effects loop but lets just leave overdrive,fuzz,distortion and boosters going through the front of the amp via the input socket and leave them there where they belong.

In the coming weeks I will post some alternative pedal orders and how to set up your pedals for the best results.