Nine Volt Pedals have already been on the scene for a while but having had their Surfing Bear Overdrive pedal on my board for the past few months, I thought it’d be worth a shout out as I can honestly say it sounds (and looks) fantastic!
Whilst it is based on that classic green pedal we all know very well, there are some subtle differences which in my opinion makes this pedal stand out! Stick it in front of a solid-state amp and it’ll sound great but where this pedal will truly excels is in front of a tube amp. When used to push your clean tone which is just on the brink of breakup, that’s when it really does shine!
As you’d expect the emphasis on the mid-range is apparent. Nothing out of the ordinary in terms of controls with the standard Volume, Tone and Drive knobs but what is noticeable is the tonal range you can get from these allowing you to go from a smooth boost to a satisfyingly warm crunch tone. The tonal variety makes this pedal extremely versatile and would certainly be a very nice addition to anyone’s pedal board.
Aside from it sounding great, it also boasts some pretty cool artwork too! Swedish artist, Jonas Claeson is responsible for the artwork across the entire range of Nine Volt Pedals and I must say I love what he’s done with them.
The Surfing Bear really is a sweet sounding overdrive pedal and comes in at a fraction of the price of the TS-808 reissue. If you’re in the market for a wonderful sounding “808” style overdrive pedal at a really affordable price, then this little gem could be just for you!
Surfing Bear Overdrive pedal @ Scan
– Drive, Tone, and Volume controls
– True bypass
– 9V battery or standard 9VDC negative tip adaptor
– Current draw 15mA
– Input impedance 500K ohms
– Output impedance 10K ohms
– Designed in Japan by One Control
So you buy your first guitar and amp and start learning to play. I can almost guarantee that it will not be long before you start to become interested in buying some pedals to stick between your guitar and amp and start a lifelong stomp box obsession……….
Pedal order is something that is talked about all the time and nothing is cast in stone and I always say to experiment and if it sounds right it is right!!!
That being said when you first get going you are going to want the basics so that is what I intend to do here. So in no particular order…………well actually in this order…………
- Wah Wah
- Modulation (Chorus?Phaser)
The above order running into the front of the clean amp will give you the perfect starting point to experiment.
Hendrix for example was Wah-Fuzz-Uni vibe-Marshall Stack which follows the above starting point with the uni vibe being his modulation at the end of the chain.This is a classic signal chain and lets (fuzz) face it Hendix had a fantastic sound.
The other subject to touch on here in the basics is when you use the amp itself for your distorted tone. This is where you will find the reverb and delays respond differently going in the front end of your amp. Based on the above signal chain if your amp is providing the distortion then you are now running the reverb and delay before the distortion which is a completley different ball game. At this point it is time to find the effects loop on your amp and plug your reverb and delay through the loop to keep the signal path correct as shown below.
Effects Loop Send-reverb-delay-Effects Loop return
Effects loops are another lesson to explain fully the different types and uses but for now lets just use the basic rule of reverb,delay,modulation(chorus/phaser) etc can all go through the front end or the effects loop but lets just leave overdrive,fuzz,distortion and boosters going through the front of the amp via the input socket and leave them there where they belong.
In the coming weeks I will post some alternative pedal orders and how to set up your pedals for the best results.
The entire range of Wampler Pedals are now available here at Scan and we are just slightly pleased to have them all here under our roof. I say slightly pleased……..as a pedal freak I’m ecstatic that these pedals are here as they are fantastic and I get to sneak off and have a play through them whenever I have some spare time!
I get asked about distortion pedals all the time and often the customer has a particular sound or style in mind. This narrows the search beautifully as a player looking to nail that SRV tone is not looking to buy a high gain pedal and vice versa the high gain lovers are not looking to buy a mild overdrive pedal. This is all well and good but what do you do when you fancy a light crunch for lunch and a high gain thump for dinner? Buy different pedals is one answer and many do for specific tones that they can switch between instantly but if this is not a requirement then a wide ranging drive pedal is probably ideal for your needs. Which after all this rambling brings me to this beauty……
In a nutshell the Pinnacle gives you mild overdrive AND extreme gain all rolled into one beautifully built pedal and its party piece is one of the most convincing “Brown Sounds” in a pedal you will hear. In fact, Eddie Van Halen’s guitar tech Zeke Clark played through this pedal and said….
“I’ve played tons of pedals that promised that “Brown Sound”… this pedal NAILS it better than anything I’ve ever heard or played.”
Trust me when I say if you are considering a drive pedal this has to be at the top of your list of must tries and if you love the tone but need extra versatility Wampler has got you covered on this score as well with the V2 pedal below. Full three band E.Q and a boost as well!
Did I mention it does that ”Brown Sound”…grab a PAF and enjoy !!
Wampler Pedals @ Scan
It’s not coming soon it’s here NOW and it’s limited to 50 pedals worldwide of which we have secured 2 pedals currently in stock.
Based on the original and highly praised SDR-4, they have retained the original circuit while using updated parts. To say this pedal gives you a full sound that cuts through the band environment is an understatement.
The SDR-4 has a fast attack and an edge to its’ sound that helps create a punchy tone with a thick low mid-range.
That Fat switch is an added bonus. When engaged it raises the gain in the low frequency range which is what gives that fat, aforementioned thick tone. This is really prominent on a single coil pickup and thickens and adds power beautifully to your bridge position.
I love a drive pedal that gives you “snap” and this pedal does it. Use a pick or use your fingers or preferably use both as hybrid picking rocks!
SDR-4 @ Scan